How to Make a Stained Glass Project

We have all seen them. From simple or three piece sun-catchers flashing their incredible colors upon the partitions of a home, to complex, multi piece masterpieces in massive stained glass home windows redecorating church buildings and museums. Some of these home windows could have lots of character pieces and look so complicated.

Working with stained glass isn’t always a complex challenge. You actually paintings with one piece at a time. Let’s observe what’s involved in a project.

There are two techniques to building a stained glass task. One is operating with a product referred to as got here and the opposite is operating with copper foil. This article will explain the procedure of operating in foil.

Simply said, to make a foil assignment in stained glass, you narrow a bit of glass, cover the edges with copper foil, solder it together with all of the other pieces, easy it up and it is accomplished.

Now for the information.

First you need a pattern. For this you could go online and test out unfastened sample web sites on the internet. There are an superb amount of sites with hundreds of styles. Check them out and look for a completely easy one that may consist of 8 or ten portions. Print it on the heaviest paper or poster board if you may get it to paintings in your printer. If not, print it out on paper, replica it onto the poster board the use of reproduction paper.

Next, reduce around every piece with sharp scissors following the line very carefully. Now vicinity each piece of the pattern, one by one, on the glass and with a black marker, hint around the piece. Now, what you need to do is to cut around the internal edge of the road along with your glass cutter. Don’t fear about no longer getting it ideal. That is what the grinder is for.

Before grinding you can use your grozing pliers to clip off larger pieces instead of grinding them off. Now you region the piece at the grinder, start it up and grind off all regions that display your marker line. Keep your sponge barely moist.

Dry the piece off and lay it on the pattern to test for accuracy. You don’t need it any large than your sample. Slightly smaller is first-rate. Continue with every piece until the whole thing suits with its neighbor.

Comments are closed.